Metravi 307 Digital Clamp On Power Meter

Send Inquiry

Request To Call Back

Metravi 307 Digital Clamp On Power Meter

Get a Price/Quote

Metravi 307 Digital Clamp On Power Meter Specification

Max Height
210 mm

Power Supply
Single 9V Battery

Automation Grade
Manual

Resolution
1A (Current); 1V (Voltage); 1W (Power)

Test Range
Voltage: 0-600V AC/DC; Current: 0-1000A AC

Features
Clamp-on design, Data Hold, Backlight, Auto Power Off

Response Time
Approx. 3 seconds

Frequency
40 Hz 400 Hz

Mounting Type
Handheld

Temperature
Operating: 0C to 40C

Measuring Range
Voltage: 0-600V AC/DC; Current: 0-1000A AC; Power: 0-600kW

Application
Electrical power measurement

Operating Voltage
9V DC (Battery powered)

Display Type
Digital LCD

Humidity
80% RH (non-condensing)

Accuracy
(2% + 5 digits)

Equipment Type
Digital Clamp On Power Meter

Usage
Measurement of electrical parameters & load analysis

Capacity
Current: 1000A AC; Voltage: 600V AC/DC

Machine Weight
Approx. 350 g (including battery)

Test Width
Jaw Opening: 40 mm (Maximum conductor size approx. 40mm)

Control Mode
Manual

Transducer Type
Hall Effect Sensor

Display Size
Large LCD with Backlight

Data Hold Function
Available

Sampling Rate
Approx. 2 times/sec

Relative Humidity
80%

Insulation Resistance
20M (between electrical circuit and case)

Product Code
Clamp-307

Storage Temperature
-10C to 50C

Dimensions
210mm x 63mm x 36mm

Model Number
307

Safety Standards
CAT III 600V

Low Battery Indication
Yes

Metravi 307 Digital Clamp On Power Meter Trade Information

Payment Terms
Cash in Advance (CID), Cheque, Cash Advance (CA)

Supply Ability
100 Per Week

About Metravi 307 Digital Clamp On Power Meter

Metravi 307 Digital Clamp On Power Meter

T-RMS AC Clamp On Power Clamp
Auto Power Off
Live Wire Detection
Min / Max and Average Recording Facility
Phase Sequence Indication
Data Hold, Peak Hold & Relative Measuring Facility
Electronic Overload Protection
Measures KW, KVA, KVAr, PF, Energy for Single Phase Loads
Measures Active Power and Power Factor for Three Phase Loads
Clamp Jaw Size : 56mm
Display : 6000 Counts Backlit LCD
AC Voltage : 0 60/600V. T-RMS
Accuracy : 1.0%
AC Current : 0 600/1500A. T-RMS
Accuracy : 2.5%
Frequency : 0 200 / 2kHz
Accuracy : 1%
Active Power : 10W ~ 600kW
Accuracy : 2.5%
Horse Power : 0.01HP ~ 600HP
Accuracy : 2.5%
Apparent Power : 10VA ~ 600kVA
Accuracy : 2.5%
Reactive Power : 10VAr ~ 600kVAr
Accuracy : 2.5%
Electrical Energy : 0.01 ~ 9999kWh
Accuracy : 2.5%
Power Factor : 0.3 ~ 1.00
Accuracy : 2.5%
Total Harmonic Distortion: 0.00 ~ 0.99
Accuracy : 2.5%
Complies with EN 61010-I (2000 Version), CAT III 600V

Advanced Electrical Measurement Capability

Benefit from precise measurement of voltage, current, and power across a wide range of applications. The Metravi 307's reliable Hall Effect Sensor supports fast and stable readings, ensuring you get accurate data up to 1000A AC and 600V AC/DC. Designed for safety and versatility, it is perfect for engineers and technicians conducting routine inspections or troubleshooting.

User-Friendly Design and Features

The power meter sports a large backlit LCD that allows for easy viewing even in dim environments. Additional features such as data hold, auto power-off, and a low battery indicator enhance usability. With its clamp-on jaw opening of 40 mm, the device is suitable for measuring large conductors efficiently and safely.

Portable and Durable for Field Use

Lightweight at approximately 350g (including battery) and robust in build, the Metravi 307 can endure field conditions. It works efficiently within temperatures ranging from 0C to 40C and humidity below 80% RH (non-condensing), making it well-suited for both indoor and outdoor electrical diagnostics.

FAQ's of Metravi 307 Digital Clamp On Power Meter:

Q: How do I use the Metravi 307 Digital Clamp On Power Meter for current measurement?

A: To measure current, open the clamp jaw (maximum opening of 40 mm) and place it around the conductor without physically disconnecting the circuit. The Hall Effect sensor detects the current, which is then displayed digitally on the backlit LCD.

Q: What is the benefit of the CAT III 600V safety standard on this meter?

A: CAT III 600V safety certification means the device is designed to withstand transient voltages in industrial environments, providing enhanced protection for users when working on equipment directly connected to the building's distribution system.

Q: When should I replace the battery in the Metravi 307?

A: Replace the single 9V battery when the low battery indicator appears on the display. This ensures continuous, reliable operation and maintains measurement accuracy.

Q: Where can I use the Metravi 307 meter effectively?

A: The meter is suitable for a wide array of electrical applications, including maintenance, installation, and load analysis in workshops, industrial facilities, and on-site fieldwork across India.

Q: What process should I follow to hold the measurement data?

A: Press the 'Data Hold' button while measuring; the current reading on the display will be temporarily stored, allowing you to record or review results without hurry.

Q: What electrical parameters can the Metravi 307 measure?

A: It measures AC/DC voltage (0-600V), AC current (0-1000A), and power (0-600kW), with high accuracy (2% + 5 digits) and quick response time, making it versatile for both troubleshooting and routine checks.

Q: How does the large LCD with backlight improve usage?

A: The spacious backlit display ensures clear, easy-to-read measurements in various lighting conditions, aiding professionals during work in poorly lit areas or at night.

Tell us about your requirement