Metravi Metrasafe-16 True RMS Digital Multimeter

Send Inquiry

Request To Call Back

Metravi Metrasafe-16 True RMS Digital Multimeter

Price 7847.00 INR/ Piece

Get a Price/Quote

MOQ : 1 Piece

Metravi Metrasafe-16 True RMS Digital Multimeter Specification

Mounting Type
Handheld

Humidity
85% RH (non-condensing)

Equipment Type
True RMS Digital Multimeter

Temperature
0C ~ 40C

Power Supply
9V Battery (6F22)

Features
True RMS, Auto/Manual Range, Data Hold, Backlight, Max/Min, NCV, Continuity Buzzer, Temperature Measurement, Diode Test

Automation Grade
Manual

Accuracy
(1.0%+3) for DCV Basic

Frequency
9.999Hz ~ 9.999MHz

Resolution
6000 counts

Application
Electrical and Electronic Measurements

Test Range
Depends on Function (Refer Measuring Range)

Measuring Range
ACV: 600mV/6V/60V/600V/1000V; DCV: 600mV/6V/60V/600V/1000V; ACA: 600A/6000A/60mA/600mA/6A/10A; DCA: 600A/6000A/60mA/600mA/6A/10A; Resistance: 600/6K/60K/600K/6M/60M; Capacitance: 10nF/100nF/1F/10F/100F/1mF/10mF/100mF; Frequency: 9.999Hz ~ 9.999MHz; Temperature: -40C ~ 1000C

Display Type
LCD with Backlight

Usage
Electrical Testing & Diagnostics

Machine Weight
Approx. 390g (with battery)

Operating Environment
0C~40C, 85% RH

Max Display
5999 (6000 Counts)

Sampling Rate
3 times/sec

Non-Contact Voltage (NCV)
Yes

Low Battery Indication
Yes

Storage Environment
-20C~60C, 85% RH

Dimension
186 x 86 x 40 mm

Model
Metrasafe-16

Backlight
Yes

Input Impedance
Approx. 10M (for V)

Input Protection
Yes

Safety Rating
CAT IV 600V, CAT III 1000V

Continuity Check
Audible Buzzer

Data Hold
Yes

Diode Test
Yes

Fuse Protection
Yes (Fuse: F10A/600V)

Battery Type
9V Battery (6F22)

Metravi Metrasafe-16 True RMS Digital Multimeter Trade Information

Minimum Order Quantity
1 Piece

Payment Terms
Cash in Advance (CID), Cheque, Cash Advance (CA)

About Metravi Metrasafe-16 True RMS Digital Multimeter

Fully Protected DMM
1200V DC/AC RMS Protection in Voltage Ranges
20A DC/AC RMS Protection in Ampere Ranges
600V DC/AC RMS Protection in Resistance, Capacitance, Frequency, Temperature, Continuity and Diode Test Ranges
Surge Protection of 8kV Peak IEC61010
O Ring Seal Body
T-RMS measurement, Peak Hold, Relative Measuring
MAX / MIN Recording,
Auto Power Off
Display: 3- Digits 4000 Counts Backlit LCD with Analog Bargraph
DC Voltage: 0 400mV/4V/40V/400V/1000V
Accuracy: 0.5%
AC Voltage: 0 400mV/4V/40V/400V/1000V T-RMS
Accuracy: 0.8%
DC Current: 0 400uA/4000uA/40mA/400mA/20A
Accuracy: 1.2%
AC Current: 0 400uA/4000uA/40mA/400mA/20A T-RMS
Accuracy: 1.5%
Capacitance: 0 4nF/40nF/400nF/4uF/40uF/400uF/4mF/40mF
Accuracy: 3%
Frequency: 0 4kHz/40KHz/400KHz/40MHz
Accuracy: 1.2%
Temperature: -20C to +760C / -4F to +1400F
Accuracy: 3%
Diode Test and Audible Continuity Test
Confirms to CAT-III 1000V, CAT-IV 600V, EN61010-1, CE

Comprehensive Measurement Capabilities

The Metrasafe-16 delivers versatile measurement options including AC/DC voltage and current, resistance, capacitance, frequency, diode testing, and temperature, supporting a broad spectrum of diagnostic needs in a single compact device. True RMS technology ensures higher accuracy even with non-sinusoidal signals.

Rugged Design and User-Friendly Features

Built for durability, this multimeter withstands challenging field conditions. Essential features like a data hold, audible continuity buzzer, LCD backlight, and an ergonomic form factor make it user-friendly. The unit offers a straightforward interface and clearly visible readings up to 6000 counts, enhancing on-the-go usability.

Enhanced Safety and Protection

Safety is paramount in the Metrasafe-16, which holds CAT IV 600V and CAT III 1000V safety ratings. Integrated fuse protection and input safeguards minimize risks during high-voltage tasks, while NCV (Non-Contact Voltage) detection further elevates user security during diagnostics.

FAQ's of Metravi Metrasafe-16 True RMS Digital Multimeter:

Q: How does the Metravi Metrasafe-16 ensure accurate measurements?

A: The Metrasafe-16 uses True RMS technology, which provides precise AC and DC measurements even with non-sinusoidal waveforms. Its resolution of 6000 counts and (1.0%+3) accuracy for DCV ensures reliable results across a variety of electrical parameters.

Q: What is the process for continuity testing with the Metrasafe-16?

A: Continuity testing is simple: select the continuity test function, connect the probes to the circuit, and listen for the audible buzzer, which indicates if the circuit is complete. This feature streamlines diagnostics and troubleshooting.

Q: When should I use the Non-Contact Voltage (NCV) feature?

A: The NCV feature is ideal for quickly identifying the presence of live voltage in wires and outlets without direct contact, enhancing user safety during initial diagnostics or before making detailed measurements.

Q: Where can the Metrasafe-16 be safely operated and stored?

A: It can be used in environments ranging from 0C to 40C and 85% RH. For storage, ensure the temperature is between -20C and 60C. The non-condensing humidity rating further protects the meter in diverse climates.

Q: How does the data hold function benefit users during measurement?

A: The data hold function temporarily stores the most recent measurement on the display, allowing users to record or observe the value even if they need to move the meter or adjust its position.

Q: What are the main safety benefits of the Metrasafe-16?

A: With safety ratings of CAT IV 600V and CAT III 1000V, as well as integrated fuse and input protection, users are safeguarded against electrical hazards during high-voltage or industrial testing scenarios.

Q: Can the Metrasafe-16 measure temperature, and how is this accomplished?

A: Yes, it measures temperature within a range of -40C to 1000C. Set the function to temperature, attach the thermocouple probe, and place it on the surface or substance to obtain an accurate temperature reading.

Tell us about your requirement