Send Inquiry

Request To Call Back

Metravi DDS-1005 DDS Function Generator

Price 20709.00 INR/ Piece

Get a Price/Quote

MOQ : 1 Piece

Metravi DDS-1005 DDS Function Generator Specification

Humidity
80% RH (Non-condensing)

Display Type
LED Display

Interface Type
BNC, USB

Automation Grade
Manual

Application
Function & Arbitrary Waveform Generation for Testing, Service & Research

Resolution
Frequency: 1Hz

Mounting Type
Benchtop

Accuracy
Frequency: 20 ppm

Operating Voltage
220V AC (50/60Hz)

Temperature
0C ~ 40C

Port Size
BNC Output

Test Range
1 Hz 5 MHz

Measuring Range
Frequency: 1Hz 5MHz

Features
Arbitrary Waveform, Frequency Counter, Sweep Function, High Stability, Digital Display

Response Time
Immediate

Equipment Type
DDS Function Generator

Power Supply
AC 220V 10%, 50/60Hz

Frequency
Sine, Square, Triangle: 1Hz 5MHz

Usage
Electronic Testing & Measurement

Machine Weight
1.8 kg

Control Mode
Digital Control

Amplitude Range
0-20Vpp (open load) / 0-10Vpp (50 load)

Distortion (Sine Wave)
<1% (up to 100 kHz)

Sweep Function
Linear or logarithmic, variable start/stop frequency

Environmental Conditions
Indoor use only, free from corrosive gas and dust

Protection
Short-circuit and overload protection

Cooling System
Natural air-cooled

Output Impedance
50 Ohm

Dimensions
260 x 215 x 95 mm

Output Stability
High frequency and amplitude stability

Modulation
AM (amplitude modulation), FM (frequency modulation)

Harmonic Distortion
<1% at 1 kHz

Duty Cycle Adjustment
10% to 90% (square, pulse)

Waveform Output
Sine, Square, Triangle, Ramp, Pulse, TTL output

Metravi DDS-1005 DDS Function Generator Trade Information

Minimum Order Quantity
1 Piece

Payment Terms
Cash in Advance (CID), Cheque, Cash Advance (CA)

Supply Ability
100 Pieces Per Week

About Metravi DDS-1005 DDS Function Generator

Sine wave output of 5MHz, full frequency range resolution is 1Hz
Square wave/pulse waveform of 5MHz, its rising, falling, and duty cycle time are adjustable
Uses DDS implementation method, with 125M/s sampling rate and 14bits vertical resolution
6-bit high precision frequency counter that is TTL level compatible
Arbitrary waveform storage of 2048 points, and it can store up to 16 groups of nonvolatile digital arbitrary waveforms
Abundant modulation types: AM, FM, PM, ASK, FSK, PSK, PWM
Powerful PC software
4.3-inch high resolution TFT liquid crystal display
Standard configuration interface: USB Device
Supports internal/external modulation and internal/external/manual trigger Supports sweep output
Easy-to-use multifunctional knob and number keyboard

Versatile Waveform Generation

The DDS-1005 enables users to create a variety of signal types, including sine, square, triangle, ramp, and pulse waveforms, with frequencies spanning from 1Hz to 5MHz. Its capability to generate arbitrary waveforms and integrate AM/FM modulation makes it ideal for a broad spectrum of testing and research tasks.

Precision and Stability

With frequency accuracy within 20ppm and extremely low signal distortion (<1% for sine waves up to 100kHz), this generator ensures consistent and reliable output. Advanced digital controls facilitate precise adjustments for amplitude, frequency, and duty cycle, essential for meticulous testing environments.

Robust Design and Usability

Designed for benchtop use, the DDS-1005 features a bright LED display, intuitive manual operation, and easy connectivity via BNC and USB interfaces. Built-in short-circuit and overload protection along with a natural air-cooling system further enhance safety and durability.

FAQs of Metravi DDS-1005 DDS Function Generator:

Q: How do I operate the Metravi DDS-1005 DDS Function Generator?

A: The DDS-1005 is operated through digital controls that allow direct adjustment of frequency, amplitude, and waveform type. Use the intuitive front panel interface and LED display to set desired parameters, and connect your test equipment using the BNC output ports.

Q: What is the maximum frequency and amplitude output of the DDS-1005?

A: The generator offers a frequency range of 1Hz to 5MHz for sine, square, and triangle waveforms. The amplitude can be adjusted up to 20Vpp for an open load and up to 10Vpp with a 50 load.

Q: When should I use the sweep and modulation functions?

A: The sweep functions (linear or logarithmic) are ideal for frequency response testing and system analysis, while AM and FM modulation are useful in communication circuit development and signal simulation. Both features allow flexible and dynamic signal generation for comprehensive testing.

Q: Where can I safely install and use the Metravi DDS-1005?

A: This function generator is intended for indoor environments free from corrosive gas and dust. It operates effectively within a temperature range of 0C to 40C and humidity 80% RH (non-condensing). Place it on a stable benchtop for optimal performance.

Q: What protections are integrated in the DDS-1005 for safe operation?

A: The equipment offers built-in short-circuit and overload protection to prevent damage during unexpected conditions. The natural air-cooling system further ensures stable operation without overheating.

Q: How does the DDS-1005 benefit research and testing processes?

A: Its high frequency accuracy, low distortion, arbitrary waveform capability, and stability enable detailed analysis and reliable simulation of circuits, supporting advanced research and comprehensive electrical testing.

Q: What interfaces and connectivity options are available on the DDS-1005?

A: The DDS-1005 is equipped with standard BNC output ports for signal output and a USB interface for PC connection or data integration, ensuring straightforward setup with various measurement instruments.

Tell us about your requirement